A fatberg can begin with leftovers from an ordinary meal. In Yorkshire, cooking fat, oil and grease cool and harden inside sewer pipes, trapping wet wipes and other waste that does not break down. The blockage grows over time and can restrict wastewater flow.
It is easy to blame wipes alone, but pouring fats and oils down the sink also contributes. Small disposal habits matter because waste can collect further along a sewer, where a blockage may be harder to clear and cause disruption.
This guide explains how fatbergs in drains across Yorkshire develop, why clearing a major sewer blockage can affect local roads and services, and how to reduce the risk at home or in a commercial kitchen. You’ll learn what belongs in the bin rather than the toilet or sink, and when a recurring drain problem may need professional attention.
Key Takeaways
- Fatbergs grow when cooled fats and oils trap wipes and other waste inside sewer pipes.
- Put wipes and sanitary products in the bin, not down the toilet.
- Let cooking fat cool and solidify, then place it in the general waste bin.
- Large sewer blockages can take time to clear and may disrupt roads and local services.
- Recurring drainage problems can point to a blockage or pipe damage that needs professional investigation.
Table of Contents
What Is a Fatberg and How Do They Form in UK Sewers?
A fatberg is a large accumulation of fat, oil, and grease combined with non-degradable waste that blocks a sewer. In UK sewers, cooking fats cool and solidify as they move through pipes. The sticky material catches wet wipes and other rubbish, gradually building into a blockage.
Drains and sewers carry wastewater, human waste and toilet paper. They are not designed to carry cooking oil, grease, cotton buds or sanitary products. These materials can collect in slower-moving sections instead of passing through. Repeated deposits from households add to the obstruction over time.
Yorkshire has a documented example in Leeds city centre. A fatberg was removed from beneath City Square in 2020. The accumulated fat had built up along a 100-metre section of brick egg sewer. It shows how a local sewer blockage can form well beyond the kitchen drains where the waste first entered.
The Leeds fatberg weighed 1.5 tonnes. Its scale shows why a sewer fatberg cannot be treated like a small blockage close to a household plughole. Size, position and access all affect the work needed to remove it.
There is no single fixed clearance cost for a Yorkshire sewer fatberg. Yorkshire Water says fatberg blockages cost the company millions to remove; the cost of an individual job depends on the blockage’s size, location, access and any damage. A severe obstruction can slow sewage flow, cause raw sewage to spill into streets or homes, and pollute rivers and watercourses.
There is a UK rule: according to The National Archives, the Water Industry Act 1991 makes it an offence to cause or allow matter likely to cause a nuisance or obstruct a sewer to enter that sewer. The rule covers material that may cause an obstruction; it does not mean every household blockage has the same circumstances.
Responsibility depends on where the obstruction lies and who owns or maintains the affected pipe. A blockage in a private drain is different from one in the public sewer network. If wastewater backs up across several properties or outside, the location and extent can help identify whether the issue affects a private drain or a sewer.
To reduce fat-related blockages, let used cooking fat cool and solidify, then put it in the general waste bin. Wipe cooled residue from pans with kitchen towel and bin the towel. Keep wet wipes, cotton buds and sanitary products out of the toilet. Yorkshire Water advises flushing only pee, poo and toilet paper.
How fatbergs form in sewers
Sewer flow depends on wastewater having a clear route through connected pipes. A substantial obstruction narrows that route, so water moves less freely past the affected section. The effect can extend upstream: properties connected to the same sewer may drain more slowly, even when the obstruction is not beneath their building.
A blockage’s position affects how the network responds. Restricted flow in a main sewer can affect a wider area than an obstruction in a local drain. Wastewater may build up behind the blockage, while flow beyond it falls. The outcome depends on the sewer layout, the obstruction’s location and the amount of wastewater entering the system.
Combined Sewer Overflows, known as CSOs, are release points in sewer networks. They allow sewage to flow into a river rather than back up in the main sewer network. In practice, a CSO provides an outlet when the network cannot contain or move the flow through its usual route.
A fatberg can restrict that usual route, but a CSO does not clear or repair the obstruction. It changes where some sewage flows. Whether an overflow occurs depends on conditions across the network, including the available flow route and the volume arriving at the affected section.
When a CSO discharges, untreated sewage can enter the receiving river or watercourse, creating environmental impacts beyond the pipe itself. Fatbergs can also contribute to pollution in rivers and watercourses, particularly when sewer flow is disrupted and wastewater escapes through an overflow or another route.
For example, a blockage in a sewer connected to a riverside overflow can have consequences beyond nearby properties. The overflow may release sewage into the watercourse instead of allowing it to back up through the main sewer. The precise effect depends on where the obstruction and release point sit within that network.
Understanding the route matters when diagnosing a sewer problem. Drainage professionals assess where flow slows, whether the affected pipe is private or part of the wider network, and whether wastewater is escaping. These observations help distinguish a local restriction from a network issue involving a CSO.
Reducing blockages helps protect normal sewer flow, but an existing obstruction needs attention at its location. If wastewater is backing up or appearing outside, stop adding water to affected drains and keep clear of any spill. The sewer route and signs of restricted flow help determine the response needed.
Fatbergs build up through the actions of thousands of households over months and years. Their formation is gradual, reflecting contributions from households across that period.
Dangers and disruption involved in fatberg clearance
Clearing a major sewer blockage is a planned piece of infrastructure work, not a quick household fix. Crews first need access to the affected sewer and room to work safely above it. The blockage’s position, the sewer’s construction and the available access points shape how the job proceeds.
In Leeds, Yorkshire Water’s team spent four nights breaking up a blockage. This example shows why clearance can happen in stages: crews need to break down the obstruction and remove the material while keeping the sewer system manageable during the work. The method and timescale depend on the blockage and the site.
Access can mean opening the road above a sewer. Roadworks may narrow traffic lanes, change parking arrangements or affect access to nearby premises. Residents and businesses can face disruption while equipment and work areas occupy the street. The scale depends on the sewer’s location and the space needed for clearance.
Temporary drainage connections may also be needed to keep wastewater moving around the affected section. These connections form part of the worksite and must remain in place while crews deal with the obstruction. Installing and removing them can add steps to the job and extend disruption for the surrounding community.
Yorkshire Water says fatberg blockages cost the company millions to remove. That figure describes the wider cost to the company, not a set price for an individual clearance. The work required depends on access, the sewer section involved and the steps needed to manage flow during removal.
For a local business, road restrictions can affect deliveries and customer access. For residents, barriers or temporary connections may alter familiar routes around the street. In Leeds, work lasting four nights meant clearance activity continued across several evenings rather than being completed in a single short visit.
After crews remove the obstruction, they need to return the affected sewer arrangement to normal use. This includes dealing with any temporary connection and clearing the work area. If the pipe itself is damaged, further work may be needed beyond removing the accumulated material.
Clearance planning accounts for more than the blockage alone. The sewer’s location, working access and need to maintain flow all affect how crews organise the job. People living or working nearby should follow temporary signs and access arrangements to move safely around the worksite while clearance proceeds.
Wipes and other non-flushable waste
Wet wipes can remain intact in pipes and catch on rough surfaces, unlike toilet paper. Once snagged, their fibres tangle and hold grease, food scraps and other rubbish. For example, a wipe caught at a pipe joint can trap more debris as wastewater passes.
Put cleaning, make-up and personal-care wipes in a bathroom bin, not the toilet. Keep the bin within easy reach so each wipe can be disposed of straight after use. If you use wipes in the kitchen, put them in household waste rather than flushing them.
Sanitary products also belong in a bin. They can absorb water and lodge in narrow pipework, particularly where a pipe already has a snag or obstruction. Keep a lined, lidded bin in the bathroom for pads, tampons and their wrappers. Don’t flush these items, even if the packet suggests they are suitable for disposal that way.
Cotton buds and dental floss cause different problems. A bud’s shape can catch against a pipe joint, while floss can tangle around other material. Put both in the bin after use. A small wastebasket beside the basin is a practical reminder for everyone using the bathroom.
Food scraps can also cause drain trouble. Before washing up, scrape plates into your household food-waste or general-waste bin. Keep coffee grounds, rice and vegetable peelings out of the sink; they may settle in pipework or combine with grease already present.
In a restaurant or staff kitchen, make disposal clear during busy shifts. Place labelled bins near food-preparation and bathroom areas, and tell staff which waste belongs in each. Separating wipes, sanitary items and food scraps at the point of use helps prevent them reaching sinks and toilets.
A useful household routine is to check the bathroom bin when taking out the rubbish, rather than leaving used items on the toilet ledge. In shared homes across Yorkshire, a simple sign near the flush can remind guests and family members what belongs in the bin.
If a toilet or sink starts backing up, stop flushing or running water into it. Adding more water may worsen the blockage or cause wastewater to overflow. Keep children and pets away from sewage, and don’t touch contaminated water. If several fittings drain slowly, the obstruction may be beyond one fixture.
For homes and businesses in Yorkshire, the practical approach is consistent: bin wipes, sanitary products, cotton buds and floss, and keep food scraps out of sinks. These habits reduce non-flushable waste entering pipework and help limit material that can collect in drains.
Domestic fat and oil disposal
Used cooking fat should never go down a kitchen sink. Yorkshire Water advises putting fats and oils in the bin instead. In a pipe, liquid fat cools, sticks to the inside and can contribute to a mass of fat further downstream. Hot water may carry it away from the plughole, but it can cool and solidify later.
After frying or roasting, let the pan or roasting tin cool until the fat has solidified. Scrape it into the general waste bin with a spatula or spoon. Don’t pour hot fat into a bin liner, where it could leak or burn someone handling the waste.
For a thin greasy coating, wipe the cooled pan with kitchen towel and put the towel in the bin. This works well after frying bacon or roasting meat, when a pan is coated but contains little loose fat. Keep the towel out of the sink, even if you plan to wash the pan straight away.
Oil from a frying pan needs the same care. Let it cool, then transfer it into a closable container for disposal with household waste. Avoid pouring oil into a toilet, outside drain or storm drain. Those routes can still allow oil to enter pipes or the environment.
Don’t try to wash grease away with washing-up liquid and hot water. Water can move oil further along the pipe, where it may cool and collect. Instead, remove visible fat first, wipe the cookware, then wash it in the sink.
Make disposal easy by keeping a suitable container near where you cook. After frying, for example, let the oil cool in the pan before carefully pouring it into the container. Keep hot pans stable and away from children while they cool. Close the container before putting it in the bin.
These steps help prevent fat-related blockages, but they won’t clear an obstruction already in a drain. If your kitchen sink repeatedly drains slowly, or wastewater returns after you’ve stopped using the tap, avoid adding more water. A recurring problem may extend beyond the sink trap into the drain.
Never reach into a drain or handle backed-up wastewater. If sewage appears, keep people and pets away from the affected area. For persistent drainage trouble, discuss a recurring drain blockage before it worsens.
Yorkshire Water’s advice is clear: fats and oils belong in the bin, not the sink. Once cooking fat has cooled, scrape it into the bin rather than tipping it down the kitchen drain. The same principle applies to a pool of fat or a film left on cookware: choose a method that keeps it out of the sink.
For pots and pans with cooled fat on their surfaces, kitchen towel provides a simple way to remove it before washing. Put the used towel in the waste bin, which can help prevent fatbergs. Keeping this step in the cooking clean-up routine supports the same disposal approach: collect fats and oily residue as waste instead of sending them down household sinks. A consistent habit makes it easier to dispose of cooking residue without relying on water to carry it away.
T.M. Drainage
T.M. Drainage can help when a household drain keeps backing up or a blockage persists despite careful disposal. Drain Unblocking addresses obstructions, while a CCTV Drain Survey can help identify where a recurring problem lies. If an inspection finds pipe damage, Drain Repairs or Patch lining may be a suitable next step.
Persistent slow drainage, wastewater returning through a fixture, or problems affecting several drains can point to an obstruction beyond the sink or toilet. Avoid handling backed-up sewage, and stop using affected fixtures if wastewater is rising. A clear assessment helps distinguish a blockage from damage that needs repair.
If a drain problem in Yorkshire is affecting your home or business, contact T.M. Drainage to discuss the issue and the appropriate next step.
Keep the next step simple
Good disposal habits help limit what enters the sewer, but they can’t clear an obstruction that has already formed. If a drain keeps slowing, backs up after use or affects several fixtures, note where the symptoms appear and when they began. These details can help distinguish a local fitting problem from one further along the drainage system.
If fatbergs in drains across Yorkshire are causing recurring symptoms, a clear assessment can help identify whether the issue needs unblocking, a CCTV survey or repair work. An obstruction in a shared sewer can affect more than one property. Avoid using affected fixtures if wastewater is rising, and keep away from any sewage spill.
T.M. Drainage can assess drainage problems and explain an appropriate next step for your property. Contact T.M. Drainage to discuss the issue. A straightforward conversation can help you move towards a clear plan for your drain.
Frequently Asked Questions
What Is a Fatberg and How Do You Prevent One?
A fatberg is a sewer obstruction formed from fats, oils, grease and waste that does not break down. Prevention means keeping these materials out of sinks and toilets, including after cooking or bathroom use. For example, make sure everyone in your household knows wipes belong in the bin, even during a quick clean-up. In a food business, clear staff routines help reduce accidental disposal into sinks.
What are fatbergs and how do they form in drains?
Fatbergs grow as grease binds with items such as wet wipes inside pipework. They usually develop beyond household fixtures, where waste can collect in slower-moving sections. A single slow sink does not prove a fatberg is present. If several fittings begin draining poorly, the obstruction may be further along shared drainage rather than at one plughole.
What causes fatbergs in Yorkshire sewers?
Fats, oils and grease entering wastewater combine with non-degradable rubbish, particularly wipes. Blockages develop through repeated deposits from homes and businesses, rather than one large disposal event. Pipe conditions also matter: materials have more opportunity to collect where flow slows. Yorkshire’s sewer network carries wastewater from many properties, so everyday disposal habits can contribute to downstream obstructions.
What health and environmental risks do fatbergs pose?
A severe obstruction can restrict sewage flow, cause wastewater to back up, or contribute to sewage escaping into streets and homes. Contact with sewage presents a public health concern, so keep people and pets away from affected areas and avoid touching contaminated water. If sewage reaches a river or watercourse, untreated waste can pollute the environment. The blockage’s location and scale affect the consequences.